The automotive industry is a relatively concentrated field for users of environmental testing equipment.

1.    Vibration Test: Sinusoidal vibration is mainly used to simulate the seismic capacity verification of ground and air transport equipment, as well as the resonance frequency analysis of the product structure and the resonance point residence verification. Random vibration is evaluated by the seismic strength of the product's overall structure and the transport environment in the packaged state. Test Standard: GMW3172 6.6.2, GMW3431 4.3.12, GM9123P 9.4, GME3191 4.26 2. 
2.    AGREE Chamber ( Temperature, Humidity Vibration ) Testing :It is a procedure for product quality control using temperature and vibration environmental stress, its main role In order to utilize the environmental stress that is specific and lower than the design strength of the product, the potential defects of the product are exposed early and removed to avoid failure due to the presence of such rickets in normal use. Test Standard: GMW3172 4.2.8/5.5.3/5.5.4, GMW3431 4.4.10, GM9123P 10.2.2, IEC60068-2-13/40/41, GB2423.21/22/25/26, SAEJ1455, MIL-STD-202G Method 105C, MIL-STD-883E Method 1001, MIL-STD-810F Method 500.4, GJB150.2.
3.    Mechanical Impact Test: the product will suffer from impact in two cases in the life cycle, one is the collision and the beating due to the vehicle walking on the slope road during the transportation process or the ground falling due to the personnel handling the impact produced. Test Standard: GMW3172 5.4.2, GMW3431 4.3.11, GM9123P 9.2, VW80101 4.2, Etl_82517 8.2.2, MGRES6221001 9.4.2, SES E 001-04 6.13.1, FORD DS000005 10.8.20, FORD_WDS00.00EA_D11 4.6 .3, PSA B21 7090 5.4.5, IEC60068-2-27, GB2423.5/6, GJB150.18, EIA-264, SAEJ1455, MIL-STD-202G Method 213B, MIL-STD-810F Method 516.5 
4.    Temperature Humidity Test: it is used to evaluate the function of the product that may be stored or used in a hot and humid environment. Test Standards:  BMW GS95003-4, GMW3172 5.5.1/5.5.2/5.6, GMW3431 4.4.1/4.4.5/4.4.6, GM9123P 9.6/9.11/9.12, GME60202_0181, VM801015.1.2/5.1.3/5.3/5.5.2,FORDDS0000510.9.1/10.9.2/10.9.3/10.9.8/10.9.9/10.9.10,FORD_WDS00.00EA_D114.5.1/4.5.2/4.5.3/4.5.4/4.5.5/4.5.8/4.8.1/4.8.4,MGRES6221001 9.3, MGRES6221001 11, SES E 001-04 6.1/6.2/6.3/6.4/6.5/6.8/6.9/6.11, IEC60068-2-30, SAEJ1455, JESD22-A103C, JESD 22-A100B,EIA-364,GB2324.1/2/3/4/9/34/4, GJB 150.3/4/9, MIL-STD-810F 507.4, MIL-STD-202G 103B/106G, MIL-STD-1004.1
5.    Temperature Test: Use temperature test to obtain data to evaluate the effect of temperature on equipment safety and performance, such as: hardening the material, deforming the part due to different shrinkage characteristics, resistance Capacitor function changes, life is shortened, lubricant is lost, and so on. Test Standards: BMW GS95003-4, VW80101 5.2.1, PSA B21 7090 6.6.5, JESD-22A104C, IEC60068-2-14, MIL-STD-810F, MIL-STD 883E 1010.7, GB2324.22 (air to Air), GJB150.5, JESD 22-A104C Ag
6.    Thermal Shock Test: It is an evaluation of the effect of product alternating at high bottom temperature and temperature. Effects: expansion, weakening of structural strength, use of chemical corrosion electrolysis, increase of electrical conductivity of insulators, deformation of movable parts, cracking of surface coatings, etc. Test Standard: BMW GS95003-4, GMW3172 5.5.5, GMW3431 4.4.2, GM9123P 10.2.1, VW80101 5.2.2, Etl_82517 8.2.8, FORD Ds00005 10.9.4, FORD_WDS 00.00EA_D114.5.6/4.5.7 , MGRES6221001 9.3.6, SES E 001-04 6.7, PSA B21 7090 6.6.3, IEC60068-2-14 (air to air), MIL-STD-883E 1011.9, MIL-STD-202G/107G, MIL-STD- 810F 503.4, GB2324.22, GJB150.5 0) 
7.    Salt Spray Test: It is recommended as a laboratory to accelerate salt spray corrosion to simulate the impact of products on the beach or on sea. Test Standards: BMW GS95003-4, GMW3431 4.4.4, GM4298P, GMI60206, SES E 001-04 6.16, eTL _82517 8.2.6, MIL-STD-202G 101E, VW80101 5.5.3, FORD_WDS00.00EA_D11 4.7.1 , IEC60068-2-11/52, ISO 4628-3, ASTM B117-03, JIS-Z2371, JIS-G3141, SAEJ2334, SAEJ1455, DIN50021 06.88, GB2324,17, GJB 150.1, MIL-STD-810F 509.4, MIL- STD-883E 1009.8