108L Salt Spray Test Chamber -Zhongke Meiqi (Tianjin) Technology Co., Ltd.

Home > products > Corrosion Aging Accelerated Test Chamber > Salt Spray Test Chamber > 108L Salt Spray Test Chamber

108L Salt Spray Test Chamber

Salt Spray test box is suitable for the salt spray corrosion test of the parts, metal materials and products of electronic, electrician, auto parts, hardware tools, etc

Model：MQ-YW-60

Inquiry

Feature Parameter Standard Compliance

Salt Spray Test Chamber

Product use:
It is suitable for salt spray corrosion test of electronic, electrical, automotive parts, hardware tools and other parts, metal materials and products coating.

Product structure features:
Both inside and outside the studio are made of anticorrosive materials, which have the characteristics of light weight, high strength, no leakage, flat surface, smooth and easy to clean.
The water seal salt fog does not leak, the jacket air duct is heated, causes the studio to heat up quickly, the temperature distribution is uniform;
Tower spray, the spray material is small, and the natural deposition distribution of salt fog is uniform.
The control system is easy to operate, PID self-tuning digital display instrument, with over-temperature protection

Salt Spray Test Chamber

Parameters

Product Name		Salt Spray Test Chamber
Product Model		MQ-YW-60	MQ-YW-90	MQ-YW-120	MQ-YW-160	MQ-YW-200
Volume(L)		108	270	480	800	1440
Internal Size W×H×W(mm)		600×400×450	900×500×600	1200×500×800	1600×500×1000	2000×600×1200
External Size W×H×W（mm）		1150×1090×672	1450×1200×842	2080×1285×1240	2480×1520×1450	2900×1550×1650
Performance Index	Temperature Range	Laboratory Temperature Range ：RT～50℃ Saturated air barrel Temperature Range ：RT～63℃
	Temperature Deviation	±1.0℃
	Temperature Uniformity	≤2.0℃
	Temperature Fluctuation	±0.5℃
	Heating Rate	Test Room RT→+50℃≤60 min Pressure Barrel RT→+63℃≤60 min
	Salt fog deposition	1～2ml/80㎡（At least 16 hours were collected and averaged）
	Spray Pressure	70～170Kpa
	Spraying Mode	Continuous spray
	Test time	1～999（S、M、H）adjustable
	PH	6.5～7.2 3.0～3.2
Main Part	Control System	LCD touch screen temperature controller
		PT100 thermocouple (armor), PID control
	Spraying System	The Nozzle is made of special glass material, the size and angle of spray can be controlled
		operate manual spray or set automatic spray according to program
Structural Features	Material Enclosure	Imported PVC polyethylene board is adopted
	Medicament refill cylinder	hidden type supplementary water gauge
	Pressurized air drum	SUS304# stainless steel high-pressure barrel
	Test Rack	The plane indexing frame can be used to adjust the Angle of fog falling or being foggy at any direction
	Cover Material	imported European acrylic board
	Spray Tower	air atomizing nozzle, height can be adjusted
	Spray volume collector	Cone funnel with diameter of 100mm
	Heating System	Titanium alloy heat pipe, steam heating, P.I.D. control heating
	Brine Tank	Made of PVC board
	Saturated air barrel	SUS304 Stainless
	Drain line	acid and alkali resistant PVC piping
	Heater	Titanium alloy armored electric heating tube (test chamber bottom heating) SUS316# stainless steel armoured heating tube (saturation barrel)
Standard Fittings	1 set of nozzles, 2 fog collecting and measuring cylinders, 2 fog collecting collectors, etc
Safty Device		Leakage, short circuit, motor overheating, overload, over current protection
Supply Voltage		AC220V 50Hz
Environment Requirement		Temperature 5.0～+30.0℃，Humidity≤85%RH，Air Pressure 86Kpa～106Kpa

Standard Compliance :

1）GB/T2423.17-2008/IEC 60068-2-11 Test method for salt spray
2）ASTM.B117-2009 Test method for salt spray
3）JIS H8502 Test method for saline spray
4）GB/T10125-2012/ISO 9227-2006 Test method for saline spray
5）GB-T5170.8-2008 Test method for environmental test equipment for electrical and electronic products - salt spray test equipment
6）GB-T5170.11-2008 Test method for corrosive gas test equipment
7）GB-T10587-2006 Technical conditions of salt spray test chamber
8）GBT 20121-2006 / ISO11474-1998 Corrosion of metals and alloys - corrosion tests in artificial atmospheres - outdoor accelerated test under salt spray - scab test