100L Temperature Humidity Test Chamber -Zhongke Meiqi (Tianjin) Technology Co., Ltd.

Home > products > Temperature Humidity Test Chamber > High and Low Temperature Humidity Test Chamber > 100L Temperature Humidity Test Chamber

100L Temperature Humidity Test Chamber

High and low temperature test chambers are widely used in aviation, aerospace, electronics, instrumentation, electrical products, materials, automotive parts, plastics and rubber products, chemicals, building materials, medical, photovoltaic and other industries.They test the temperature stress, temperature aging screening, reliability testing, performance testing, weathering test, high temperature storage of test pieces under high temperature and environmental conditions.

Model：MQ-TH100F-2

Inquiry

Feature Parameter Standard Compliance

100L Temperature Humidity Test Chamber

product name		High and low temperature test chamber
Product number		MQ-T100F-2	MQ-T250F-2	MQ-T500F-2	MQ-T1000F-2
Nominal volume	unit/L	100	250	500	1000
Inner size	Width × depth × height (mm)	450×450×500	600×600×700	750×750×900	1000×1000×1000
External size	Width × depth × height (mm)	650×1000×1450	800×1200×1700	950×1400×1900	1200×1500×1950
Performance	Temperature range	A,-40℃~150℃ B,-70℃~150℃ C,-90℃~150℃ D,-120℃~150℃
	Temperature fluctuation	±0.5℃
	Temperature uniformity	≤2.0℃
	Temperature deviation	≤±2.0℃
	Heating rate	≥2.0℃/ Min
	Cooling rate	≥2.0℃/ Min
	Linear temperature control	0.5~1.0℃/Min
Refrigeration method		Compressor refrigeration
Cooling method		Air-cooled
The main components	Control System	Siemens programmable controller + touch screen + independent development program
	Heating system	Fully independent system, high efficiency stainless steel finned tube heater
	Cooling System	Importer-type scroll compressor
	Circulatory system	Temperature and low noise motor, stainless steel centrifugal impeller
Use materials	Carton material	High-quality carbon steel plate, phosphating electrostatic spray treatment
	Inner box material	International standard SUS304# stainless steel mirror treatment
	Insulation material	Hard flame retardant polyurethane foam
	Sealing material	High and low temperature environment-friendly silicone rubber seal
voltage		380±10% VAC,50Hz,3L+N+G
Communication Interface		RS232 communication interface, USB data interface
Standard configuration		Sample holder 1 set, test lead hole 1 set
Optional accessories		Recorder, Remote Control Software, Insulated Sample Holder, Split Manipulator, Dry Air Purge
safety devices		Leakage, short circuit, motor overheating, heater overheating, compressor overpressure, overload, multiple overtemperature protection
Environmental requirements		Ambient temperature: 5~35°C, relative humidity: ≤85%RH, no strong vibration, electromagnetic radiation, no dust and corrosive substances around
Note: 1.temperature performance parameters are in the ambient temperature of 25 °C, studio no load conditions, in accordance with GB/T5170.2-2008 test; 2. according to the specific requirements of users customized non-standard high and low temperature test box; 3. This technical information is subject to change without notice.

100L Temperature Humidity Test Chamber

Technical indicators

Product name			High and low temperature hot and humid test chamber
Product model			MQ-TH100F-2	MQ-TH250F-2	MQ-TH500F-2	MQ-TH1000F-2
Nominal volume	unit/L		100	250	500	1000
Inner size	Width × depth × height (mm)		450×450×500	600×600×700	750×750×900	1000×1000×1000
External size	Width × depth × height (mm)		650×1000×1450	800×1200×1700	950×1400×1900	1200×1500×1950
Performance index	Temperature range		A,-40℃~150℃ B,-70℃~150℃ C,-90℃~150℃ D,-120℃~150℃
	Humidity range		A,10%~98%RH B, 20%~98%RH C, 30%~98%RH
	Temperature fluctuation		±0.5℃
	Humidity fluctuation		≤±2%RH
	Temperature uniformity		≤2.0℃
	Temperature deviation		≤±2.0℃
	Humidity deviation		Humidity>75%RH:≤+2,-3%RH; Humidity<75%RH:≤±5%RH
	Heating rate		≥2.0℃/ Min
	Cooling rate		≥2.0℃/ Min
	Linear temperature control		0.5~1.0℃/Min
Refrigeration method			Compressor refrigeration
Cooling method			Air-cooled
Main components		Control System	Siemens programmable controller + touch screen + independent development program
		Heating system	Fully independent system, high efficiency stainless steel finned tube heater
		Humidifying system	Imported electronic humidity sensor
		Cooling System	Importer-type scroll compressor
		Circulatory system	Temperature and low noise motor, stainless steel centrifugal impeller
Main materials		Carton material	High-quality carbon steel plate, phosphating electrostatic spray treatment
		Inner box material	International standard SUS304# stainless steel mirror treatment
		Insulation material	Hard flame retardant polyurethane foam
		Sealing material	High and low temperature environment-friendly silicone rubber seal
voltage			380±10% VAC,50Hz,3L+N+G
Communication Interface			RS232 communication interface, USB data interface
Standard configuration			Sample holder 1 set, test lead hole 1 set
Optional accessories			Recorder, Remote Control Software, Insulated Sample Holder, Split Manipulator, Dry Air Purge
safety devices			Leakage, short circuit, motor overheating, heater overheating, humidification, water shortage, compressor overpressure, overload, multiple overtemperature protection
Environmental requirements			Ambient temperature: 5~35°C, relative humidity: ≤85%RH, no strong vibration, electromagnetic radiation, no dust and corrosive substances around

Standard Compliance :

1. IEC60068-2-1 Environmental testing - Part 2: Test methods - Tests A: Cold
2. IEC60068-2-2 Environmental testing for electric and electronic products Test methods - Tests B: Dry Heat
3. IEC60068-2-30 Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12h+12h cycle)
4. IEC60068-2-78 Environmental testing - Part 2-78: Tests -Test Cab: Damp heat ,steady state
5. MIL-STD-810F-501.4 High temperature test
6. MIL-STD-810F-502.4 Low temperature test
7. MIL-STD-810F-507.4 Damp heat test
8.GB/T 10589-2008: cryogenic test chamber technical conditions
9.GB/T 10592-2008: high and low temperature test chamber technical conditions
10.GJB 360B-2009:test methods for electronic and electrical components
11.JJF 1101-2003: environmental and test equipment temperature and humidity calibration specifications
12.GB/T 5170.2-2008:test method for environmental test equipment of electric and electronic products Temperature test equipment
13.GB/T 5170.5-2008:test methods for environmental testing equipment for electric and electronic products humidity test equipment